K800 Reverse Osmosis Filter System
High Quality, Elegant RO System
PurePro K800 system is a modern kitchen appliance that has been carefully designed with health consciousness, efficiency, high performance and convenience in mind. K800 uses K-Series inline filters which has molded quick-connect fittings that are easy to insert and remove the tube.
PurePro K800 system uses reverse osmosis (RO) technology - which is recognized as the most effective at significantly reducing a large number of contaminants that may be in your water - no other home water treatment system offers you as much protection and reliability.
--------------------------------------------------------------------------------
The success of the K-Series filter is directly attributable to the innovative quick-connect fittings that are incorporated into the design. These fittings are unique in two ways. First, they allow for the installation of the inline filter in a matter of seconds. Inlet and outlet tubes are simply snapped into place and secured using a patented collet system. Second, the fittings are molded directly into the filter body and cap as a single unit. This reduces the chance for weeping or seepage. (click here for more information)
Fits conveniently under any kitchen sink
The stylish design of the PurePro K800 system was created to fit elegantly in any kitchen environment. The clean lines and graceful contours of the bright white cabinet make it the most attractive reverse osmosis water system available.
Easy installation
PurePro K800 system use quick-connect fitting design makes installation fast and easy. click here for more information.
--------------------------------------------------------------------------------
All-In-One System
A very compact solution that efficiently combines reverse osmosis (RO) technology with k-series inline cartridge filters and water storage tank(2.2G) to produce high quality pure water. Small enough to fit comfortably under a standard sink or other small, convenient location. The economical, friendly, easy-to-install and easy-to-maintain solution to your purified water needs.
K-Series Inline Filter
Use K-Series filter cartridge design makes filter changes fast, clean and easy. No tools required for replacements. click here for more information.
--------------------------------------------------------------------------------
Features:
Build-in 1.8Gallons NSF Standards Water Storage Tank.
Complete 5 stage reverse osmosis water filter system.
Easy-open lid for easily cartridge filters replaced.
Use K-Series filter design makes filter changes fast, clean and easy.
Automatic shut-off valve or Solenoid Valve (pump model).
Flow Restrictor, Stainless Steel Check Valve.
Long Reach Chrome Faucet (upgrade faucet is acceptable)
Feed water connector, deliver valve & Drain Saddle Valve.
Quick-connect fitting for easy installation.
Completely Assembled & Water leaking testing
100% Factory Tested and Sterilized Ready for Installation.
High capacity booster pump. (optional)
--------------------------------------------------------------------------------
K800 - In-Line Cartridge Filters
(Stage 1) 5 Micron Sediment Filter :
With only five micron rating. It is effective in removing dirt, rust and sand particles.
(Stage 2) Granular Activated Carbon Filter:
It takes out 99% of the chlorine and organic chemicals. It provides enhanced reduction of taste, odor, and color.
(Stage 3) Granular Activated Carbon Filter :
It takes out 99% of the chlorine and organic chemicals. It provides enhanced reduction of taste, odor, and color.
(Stage 4) Reverse Osmosis Membrane:
A thin film composite (TFC) high quality membrane that processes 50 gallons per day. It remove the following hard water contaminants that may be present in your water: lead, cooper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite, nitrate, and selenium.
(Stage 5) Inline Post Carbon filter:
This carbon post filter removes objectionable tastes and odors to enhance the quality of your drinking water. We are using NSF approved post carbon to guarantee the taste of water.
--------------------------------------------------------------------------------
Production: 50 GPD / 189 LPD
Water storage tank: 1.8gallons
With a booster pump (optional):
-Input in AC 110Volt, 220Volt or 240Volt (50/60Hz).
Operation pressure: 10 -80 psi
Dimensions: (cm) 42 (L) x 41.5(H) x 24 (W) - system
Weight: 10 kg - K800 system
13 kg - K800P (with pump)
Model Number
K800 : K800 RO system
K800P : K800 with booster pump
